8 Best Canoe Trolling Motor Mounts

If you’re a fisherman and want to take your fishing skills to the next level, then you’ll find insight in this article. When fishing, there are many ways to skin a cat. You can fish offshore, in lakes, ponds, streams, or even on boats. The advantage of fishing on boats is that you can travel and tread to new areas of water to find fish. If you’ve been fishing for any amount of time, you’ve probably experienced some peaks and valleys where sometimes it’s a slow day. Either no fish are biting, or maybe they’ve migrated to another location. When you are fishing with a canoe, you can fish deeper spots that you normally wouldn’t reach, allowing you to find new types of fish. 

However, face it paddling on your canoe for hours is rather tedious and strenuous on your body. With a canoe motor mount, you won’t need to do that anymore. All you have to do is attach this motor mount to your mount along with a marine battery, and it’ll bring you along for a ride. You’ll travel faster and farther than you ever could with a wooden paddle. In this article, we’ll share the top canoe trolling motor mounts in the market, so you can begin enjoying the benefits of canoe fishing without all the heavy lifting.

8 Best Canoe Trolling Motor Mounts

1. Bullnose Rudder Clamp On Rudder for 24-55 Thrust Trolling Motors: Pontoons, Kayaks, or Canoes
$35.99
2. Canoe Trolling Motor Mounting Bracket with Natural Ash Finish
$79.99
3. Brocraft Canoe Trolling Motor Universal Mount
Out of Stock
4. AquaOutdoors Canoe Trolling Motor Mount Bracket - Olive Drab Finish
Out of Stock
5. Toygogo Kayak Engine Block Board Trolling Motor Mount Assembly Bracket Board + 2X Outrigger Stabilizer Mount Holders/Motor Bracket for Fishing Boats Canoes
$124.56
6. Old Town Standard Canoe Motor Mount
Out of Stock
7. SolUptanisu Outboard Motor Bracket Kayak Motor Support Iron Engine Mounting Kit Motorcycle Engine Mount Bracket for Fishing Boat Canoe Inflatable Boat Raft Black
Out of Stock
8. Vbestlife. Kayak Motor Bracket Waterproof Outboard Canoe Motor Mount Kit Holder Raft Shaft for Inflatable Fishing Boat Raft Black
Out of Stock
1

Bullnose Rudder Clamp On Rudder for 24-55 Thrust Trolling Motors: Pontoons, Kayaks, or Canoes

Kiwi Camp Dry Heavy Duty Water RepellentThe Bullnose Rudder Clamp is an excellent thrust trolling motors for your canoe fishing. This mount works for pontoons, kayaks, canoes, small boats, Jon boats, and more. This measures at 11” high x 5” wide and fits a one ⅛” shaft diameter. This rudder fits most electric trolling motors, and even some cable pull bow mounts.

Pros

  • Great for control and maneuver
  • Moves in straight line
  • Easy setup and mounting

Cons

  • ot ideal for any midsize or bigger water crafts/boats

Our Take

When the wind picks up, you do not want to be manually paddling as your steering won’t be accurate. Furthermore, it’ll take more energy to move than to fish. The water can be choppy, and you want to stay in a straight track line. That is what this Bullnose Canoe Mount is used for. All you have to do is mount this bullnose rudder to the shaft of your trolling motor and notice a huge improvement to your steering abilities and maneuver your canoe with ease. You can hold onto the handle to simply steer the canoe in any direction, and you’ll move with ease. Once you’ve found your spot, you can stay and fish with ease. Also, I noticed that the battery lasts at least 8 hours when fully charged. That’s long, considering most people don’t fish for 8 hours.

2

Canoe Trolling Motor Mounting Bracket with Natural Ash Finish

Kiwi Camp Dry Heavy Duty Water RepellentThe Canoe Trolling Motor Mounting Bracket is a piece of heavy-duty equipment to steering your canoe efficiently and conveniently. It’s made from natural ash that is rugged, heavy-duty to withstand demanding environments. The mount is 28 inches long and provides a full range of motion and no tools required for setup. It has a star bolt knobs for one-hand tightening. The thickness of the crossbar is 2.5 inches wide and 1.10 inches thick. The motor block is 4”x6”x8.75 inch thick. The clamp holes are on 12” center.

Pros

  • Easy to set up
  • Strong and heavy-duty
  • Durable for harsh weather environments
  • Able to maneuver with a full range of motion

Cons

  • Can be pricey

Our Take

If you’re looking for an easy to use and setup bracket, this is the one for you. Most mounts are made of aluminum, steel, or even plastic. We like that this is refined natural ash, which is heavier than other mounts. This means it won’t be flimsy and will be durable against strong currents. The length at 28 inches is pretty good since it’ll have enough leverage to turn even the bigger sized canoes out there. Lastly, it has a full range of propeller motion, so you can theoretically navigate in circles.

3

Brocraft Canoe Trolling Motor Universal Mount

Kiwi Camp Dry Heavy Duty Water RepellentBrocraft Canoe Trolling Motor is a universal mount that words for different hull width on canoes. The mount is adjustable, which makes it ideal for all sizes of canoes. It’s also adjustable for left and right-hand operation. It’s made of marine grade alloy and nylon material. It’s easy to install and remove from gunwales — no tools needed for the installation process. You can hand tighten onto gunwales on your canoe. The product includes a two-year warranty.

Pros

  • Includes two-rod holders for sturdiness
  • Easy installation and easy removal
  • Adjusted to fit most canoe sizes
  • Durable for harsh weather

Cons

  • Quite expensive

Our Take

Though the Brocraft Canoe Trolling Motor Mount can be a bit expensive compared to others in the market, we believe the quality warrants the price. The material is made from marine grade alloy to mount so that it'll endure harsh weather conditions, currents, or event potential small bumps from maneuvering towards rocks. It's got a lot of extra support, including side mounting clamps for additional support and security to ensure it stays put. It's very easy to install and remove. Overall, it's a premium grade motor mount well worthy investment.

Out of Stock
4

AquaOutdoors Canoe Trolling Motor Mount Bracket - Olive Drab Finish

Kiwi Camp Dry Heavy Duty Water RepellentThe AquaOutdoors canoe trolling motor mount bracket is a well-made mount to help navigate your canoe to wherever you want to go. The mount is made of solid ash in an olive drab finish. The mount is a rugged, heavy-duty construction to withstand any weather conditions. It has a 28 inch long and provides a full range of motion. No tools are necessary for installment, and star bolts are included to use one hand to tighten.

Pros

  • Easy installation process
  • Full range of motion
  • Durable solid ash finish

Cons

  • May not withstand heavy canoes

Our Take

When it comes to maneuvering your canoe, we believe that a solid ash finish mount is the best due to its ability to withstand harsh weather conditions. You’ll be able to use these for years to come. Its 28-inch length gives you enough leverage and torch to make turns (even 180 degrees) to get to your desired spot in the water. There’s no equipment mount it on your canoe and tighten with the star bolts included. This will save you tons of time, and with this mount, you’ll never have to use paddles ever again!

Out of Stock
5

Toygogo Kayak Engine Block Board Trolling Motor Mount Assembly Bracket Board + 2X Outrigger Stabilizer Mount Holders/Motor Bracket for Fishing Boats Canoes

Kiwi Camp Dry Heavy Duty Water RepellentThe Toygogo Kayak Engine Block Board Mount is an excellent and unique mount for both fishing boats and canoes. The package includes one pair of kayak stabilizer outrigger, motor mount holders, and reinforced motor block board set for kayak trolling motor assembling. The mount is made with nylon making it extremely lightweight, durable, and portable. To set up, securely attach to the motor bracket to the gunwales. It has a universal fit to any kayak using the motor grooves — ideal for kayaks, canoes, marine boats, fishing dinghies, and rafts. The diameter is 33-34mm/1.29 inches. The size is 9x2x2cm. The blockboard size is 7.3x2.95x1.2 inches.

Pros

  • Securely attaches to mount
  • Fits many types of water rafts and canoes
  • Lightweight
  • Easy to carry for portability

Cons

  • Takes time to get used to (works double-sided)

Our Take

The Toygogo Kayak Engine Block Board Mount is one of the most secure motor mounts we’ve seen in the market. Since it’s double-sided, meaning you attach to both the left and right side of your canoe, I believe it’s more stable to make turns. With a one-sided mount, there’s a possibility of feeling uneasy if the weight isn’t distributed evenly. Especially if you’re the only person on the boat, with this, even if you’re fishing alone, the weight will be distributed nicely, similar to a plane with both wings. It comes with motor grooves to help adjust and fit different size boats. Overall this canoe mount tends to fit a wider selection of boats such as a marine boat, which is a midsize/large boat. Many mounts are only made for canoes. If you have a larger boat and are looking for something a little more secure, I believe this will be the perfect option for you.

6

Old Town Standard Canoe Motor Mount

Kiwi Camp Dry Heavy Duty Water RepellentThe Old Town Standard Canoe Motor Mount is a heavy-duty aluminum bracket that has excellent power for optimal navigation. The bracket holds a gas or electric engine up to 3 horsepower so you can quickly and efficiently cruise to your favorite fishing spot. No tools are necessary for setup. Just use one hand to tighten the mount to the gunwales of your canoe for security. The mount works for both left and right-hand dominant individuals. The item weight is 6.46 lbs.

Pros

  • Great power (3 horsepower)
  • Easy to install
  • Durable -- made of heavy-duty aluminum

Cons

  • Pricey
  • A bit heavy

Our Take

We've personally tested this old town mount on our 164 canoes, and it works great. It holds the weight up well, and the power is incredible. Imagine having a jet ski or mid-sized cruise, that’s how fast this motor can go. If you want to travel distances quickly, this motor will help. It’s effortless to install and remove. The mount is already set up, need to tighten up the grooves, and you’re all set. We do like the wood finish as well, which seems to withstand rain and stormy conditions. If the current is riding against you, you can easily override that with these excellent old town mount.

Out of Stock
7

SolUptanisu Outboard Motor Bracket Kayak Motor Support Iron Engine Mounting Kit Motorcycle Engine Mount Bracket for Fishing Boat Canoe Inflatable Boat Raft Black

Kiwi Camp Dry Heavy Duty Water RepellentThe SolUptanisu Outboard Motor Bracket is an excellent mounting kit for a smooth and fast ride on your canoe or kayak. The motor mount kits use hard plastic hanging panels to help with navigation. For durability and strength, the motor bracket uses high-quality iron and pp material. The metal is anti-corrosion and rust-resistant. It’s a high pressure and high-temperature resistance. The product dimensions are 13.4 x 10.6 x 10.2 inches and weigh 5.73 pounds. The dimensions of the board are 25.cm x 15.6cm.

Pros

  • High quality material
  • Withstands pressure, able to use heavy canoes
  • Easy to Install
  • Durable and long lasting

Cons

  • Can be expensive

Our Take

Since the diameters of this bracket are rather smaller, we believe it’s most ideal for water rafting. If you have a motor mount that is too big, most don’t usually fit for water rafting. Even if you enjoy rafting, this can serve as extra insurance to help you with any currents that are too hard to paddle your way out of. It’s very lightweight and easy to carry. You can strap it onto your hiking or camping backpack if you want.

We love the extra protection that the motor mount has for durability. It is anti-corrosion resistant and can withstand high pressure and high-temperature resistance. Basically, you can let it withstand any possible weather or water condition. Based on our testing, we’ve found it works quite smoothly so you can safely land in your desired spot.

Out of Stock
8

Vbestlife. Kayak Motor Bracket Waterproof Outboard Canoe Motor Mount Kit Holder Raft Shaft for Inflatable Fishing Boat Raft Black

Kiwi Camp Dry Heavy Duty Water RepellentThe Vbestlife motor bracket is a mount perfect for fishing boats, rafts, and canoes to use for easy navigation. The mount is made of high-quality iron and pp material, allowing the motor mount to be firm, durable and not flimsy. The outboard motor has an anti-corrosion metal bracket and easily hands outside the hull of your craft. Overall the motor bracket is small, lightweight, and easy to store and carry — the product dimensions of 13.4 x 10.6 x 10.2 inches. The shipping weight is 5 lbs.

Pros

  • Very portable fits inside your bags
  • Light and won’t disrupt the balance of your boat raft
  • Easily mounts to the outside of your hull
  • Iron and pp material -- made to last

Cons

  • Quite pricey

Our Take

When it comes to boat rafting or kayaks, you want a reliable motor bracket that gets you to your spot smoothly. With kayaks, you don’t want a clunky wooden finish, because that can be too heavy for such a small vehicle. The metal bracket is quite light, easy to mount. We found that the hard plastic hanging panels helps to rise and fall.

We are most impressed with the power of the motor, considering the overall motor bracket is so small. The motor supports up to a four horsepower so you can pretty much zoom through the waters even against the current with ease. Since it mounts tightly, you won’t need to worry about it loosening. This is an excellent choice if you want extra security or simply navigate through water with ease!

Out of Stock
Joshua Keaton
Joshua Keaton

Joshua is our senior staff writer for Fishing.org and Shooting.org. He is an avid hunter, clay shooter and amateur photographer.